iPECS UCP - Keypad Facility

iPECS UCP
Feature Description and Operation Manual Issue 1.3
319
Operation
System
Conditions
ETSI standard AOC operation is automatic.
1. AOC information, which is implemented based on ETSI AOC standard, can be
sent during call set-up (AOC-S), during the call (AOC-D) or at the end of call
(AOC-E).
2. This feature may not be available in the specific ISDN service area or may be a
subscription service.
Programming
SYSTEM DATA
SMDR Attributes
CO LINE DATA
ISDN Attributes

Advice of Charge
Related Features
 SMDR (Station Message Detail Recording)
 Call Cost Display
Hardware
 ISDN Line
4.14.3 Keypad Facility
Description
The ISDN Keypad Facility Information Element (IE) may enable you to activate certain ISDN
services (e.g. Off-Net Forward). To access this facility, your Station must be enabled and
have a {KEYPAD FACILITY} Flex button. When activated, the digits you dial are sent in the
Keypad Facility IE instead of the Called Party Number IE.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “89” + [HOLD/SAVE]
To program {KEYPAD FACILITY} button
1. Press the {KEYPAD FACILITY} button.
To activate the keypad facility while on an ISDN line
2. Dial desired digits; other actions disable the Keypad facility feature.