iPECS UCP
Feature Description and Operation Manual Issue 1.3
48
2.12 Automatic System Daylight Saving Time
Description
The system can automatically adjust for Daylight Saving Time (DST). When DST is enabled,
the system will adjust the system time forward one (1) hour at the DST Start time and back
one(1) hour at the DST End time. The system time is sent for display to all devices and
terminals and is the basis of the various time-based features (Auto Service Mode, Wake-up
Alarm, etc.).
Operation
System
Conditions
Operation of this feature is automatic.
1. The DST Start and End times are set through the Web Admin interface only.
2. The interval between the DST Start and End times must be at least 7 days.
Programming
SYSTEM DATA System Data &Time Time, Date
DST (Daylight Saving Time) Mode, DST Start Time, DST
To Next Page
Loading...
