iPECS UCP
Feature Description and Operation Manual Issue 1.3
182
2.62 Outside Call Time Restriction
Description
The system can be programmed to limit the length of outgoing calls by specified stations. If
Call Time Restriction is assigned to a station, when the station places an outgoing call, the
system initiates the Cut-Off timers for the Station and the outside Line. Fifteen (15) seconds
prior to expiration of the shortest timer, a warning tone is delivered to the station. At expiration,
the system terminates the call returning the external Line to idle.
Operation
System
Conditions
Operation of this feature is automatic when assigned.
1. Once activated, the Cut-Off timer continues timing while the call is connected to
the system even if the call is transferred or picked up at another station.
2. Two Cut-Off timers are provided, one assigned on a Station basis, the other
assigned CO basis. The shortest of the two timers controls the Cut-Off function
Programming
STATION DATA Common Attributes Call Time Restriction
To Next Page
Loading...
