iPECS UCP - 2.15 Call Forward

To Next Page

To Previous Page

iPECS UCP

Feature Description and Operation Manual Issue 1.3

2.15 Call Forward

Description

You can have selected incoming calls re-routed to other stations (local or networked), station

groups, the integrated Auto Attendant/Voice Mail, or over a system outside Line (Off-Net).

You select the type and condition under which calls will forward by entering a Call Forward

code as follows:

Code 0 Remote Call Forward, forwards all calls to the station, except recalls, activated

from a remote station, Call Forward, Follow-me.

Code 1 Unconditional, all calls to the station, except recalls, forward internally or

externally immediately upon receipt.

Code 2 Busy, if the station is busy, forwards all calls, except recalls, to the selected

station.

Code 3 No Answer, forwards all calls, except recalls, to the selected station when the

station does not answer within the No Answer timer.

Code 4 Busy/No Answer, forwards calls if the selected station is busy or does not

answer within the No Answer timer.

Code 5

Attendant Off-Premise, forwards incoming outside calls to an outside number.

Code 6 Off-Net Unconditional, all calls to the station, except recalls, forward internally

or externally, only SLT.

Code 7 Off-Net Busy, forwards all calls, except recalls, to the selected station when

station is busy, only SLT.

Code 8 Off-Net No Answer, forwards all calls, except recalls, to the selected station

when the station does not answer within the No Answer timer, only SLT.

Code 9 Off-Net Busy/No Answer, forwards calls if the selected station is busy or does

not answer within the No Answer timer, only SLT.

Operation

iPECS IP & LDP Phones

1. Lift the handset or press the [SPEAKER] button to receive dial tone.

To activate Call Forward, (Unconditional, Busy, No Answer, or Busy/No Answer)

2. Press the [FWD] button or Soft key. For the LIP8002, the [DND] button is used to

activate Forward.

3. Dial desired Call Forward code (“1”~“4”).

4. Dial the station or station group to receive calls.

Or, Dial an outside Line access code (9, 8xx, 88xx) and the desired external phone

number.

Or, Dial 587 (for Station ICR).

Press the[SPEED] button and dial the desired bin number.

Other manuals for iPECS UCP