iPECS UCP
Feature Description and Operation Manual Issue 1.3
3
2. SYSTEM
2.1 8-Digit Station Numbering Plan
Description
The system supports Station Numbering Plans from two to eight digits. The Station number
consists of a Prefix digit string and a suffix called “Add Digit”. A Prefix digit string can be up to
six (6) digits that do not conflict with the system Flexible Numbering Plan used for feature
codes. The Add Digit defines the number of digits from the Station Number that are added as
the suffix to the Prefix digits to form the Station Number. The Add Digits can be 2 to 4 digits in
length using the right most digits of the Station Number and must uniquely identify the station.
Operation
System
Conditions
Operation of the 8-digit Station Numbering Plan is automatic when configured
1. The system employs the complete Station number, 2 to 8 digits, when sending
messages to an external device such as an adjunct Voice Mail and TAPI device
such as ez-Attendant. It is the responsibility of the 3
rd
party software to support the
defined Station Numbering Plan.
2. When using Keyset Admin to configure the 8-Digit Table, Prefix Usage must be
enabled in the System ID PGM 100.
Programming
SYSTEM ID &
To Next Page
Loading...
