iPECS UCP
Feature Description and Operation Manual Issue 1.3
57
2.17 Call Park
Description
You may place an active Internal & External call in a special holding location called a Park
Orbit for easy access from any station in the system. There are 200Park Orbits allowing
multiple calls to be parked simultaneously.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To park an active Internal & External call
2. Dial the Park Orbit number (#601~#800).
3. Return to idle.
1. Lift the handset or press the [SPEAKER] button.
To retrieve a parked call
2. Dial the Park Orbit number (#601~#800).
SLT
1. Momentarily press the hook-switch.
To park an active Internal & External call
2. Dial the Park Orbit number (#601~#800).
3. Return to idle.
1. Lift the handset.
To retrieve a parked call
2. Dial the Park Orbit number (#601~#800).
Conditions
1. If the selected Park Orbit returns a busy signal, the user may simply dial another
Park Orbit without the need to disconnect.
2. Intercom calls cannot be placed in a Park Orbit.
3. A Parked call will recall to the station that parked the call should the Call Park
Timer expire. The normal Hold Recall process is then initiated.
4. A Parked call will indicate busy at all appearances.
Programming
STATION DATA
To Next Page
Loading...
