iPECS UCP
Feature Description and Operation Manual Issue 1.3
239
hold and you receive dial tone.
3. Place the second call.
4. When connected, momentarily press hook-switch twice in 2 seconds to connect all
parties.
Conditions
1. Multi-line conference time is not applied on 3-party Net Conference.
2. A SIP phone cannot initiate a Net Conference.
Programming
NETWORKING DATA Net Basic Attributes
Related Features
Multi-Party Conference
Hardware
2.80.2.7 Net Station Message Waiting
Description
When a called station does not answer or is in DND, you can activate a Station Message
Wait indication to request a Call Back. A station may receive a Message Wait from any
number of other stations in the system. The station receiving the Message Wait can return
the calls using the [MESSAGE/CALL BACK] button.
Operation
iPECS IP & LDP Phones
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving ring back tone or no response on a call
announce
2. Hang up, Message Wait activated.
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving DND tone
2. Hang-up, Message Wait activated.
1. Press [MESSAGE/CALL BACK] button, the message contents summary as
below or the Station Messages Waiting list will display.
To retrieve Station Messages Waiting
To Next Page
Loading...
