iPECS UCP - Mark a Message as Private; Mark a Message for Delivery Confirmation

iPECS UCP
Feature Description and Operation Manual Issue 1.3
141
2.46.3.6 Mark a Message as Private
Description
When you send or reply to a message, you can mark the message as Private so that the
receiver cannot forward the message.
Operation
1. After identifying the receiver, you will receive the send message options prompt
To mark a message as private
“For regular delivery, press 1. To mark urgent, press 2. To mark private, press 3.
To mark urgent and private, press 4. To request delivery receipt of the message
for future, press 5.”
2. Dial “3” or “4”, the message is sent as a private message and you receive the
“Your message has been sent” prompt.
Conditions
1. You must be permitted to mark a message as Private as part of the VM COS
Programming
SYSTEM DATA
VM COS Attributes
Related Features
 Send a Message
 Distribution Lists
Hardware
2.46.3.7 Mark a Message for Delivery Confirmation
Description
You can mark a message so that when the receiver listens to the message you are notified
with a confirmation message.
Operation
1. After identifying the receiver, you will receive the send message options prompt
“For regular delivery, press 1, to mark urgent, press 2, to mark private, press 3, to
mark urgent and private, press 4, to request delivery receipt of the message, press
5.”
To mark a message for Delivery Confirmation
2. Dial “5”, the message is sent.