iPECS UCP - Auto Release of [SPEAKER]

iPECS UCP
Feature Description and Operation Manual Issue 1.3
333
5.2 Auto Release of [SPEAKER]
Description
After completion of certain features, the [SPEAKER]button turns off automatically, returning
the iPECS IP or LDP Phone to idle.
Operation
System
Conditions
Auto Release of the [SPEAKER] button operation is automatic. For the supported features,
refer to the conditions.
1. This feature applies to all User and Attendant Programming except Custom
Message, outside Line Disable and Version Display. Auto Release of [SPEAKER]
button also applies to features including Call Park, Call Back, Call Forward and
Queuing.
2. If, during Station User Programming, erroneous data is entered, error tone is
received and the user must correct the error before the station will return to idle
automatically.
Programming
Related Features
Hardware
 iPECS IP or LDP Phone