iPECS UCP - 5.27 Voice Over

iPECS UCP
Feature Description and Operation Manual Issue 1.3
366
5.23 Station Flexible Buttons
Description
The iPECS IP and LDP Phones incorporate a field of “Flex” buttons as well as the fixed
feature buttons. The Flex buttons are assigned in the system database to access features,
functions and resources of the system. Specifically, Flex buttons can be assigned as:
 An Empty button has no system database assignment.
 A {DSS/BLF} button places One-touch ICM call to a designated station and displays
status of the station.
 A Flex Numbering Plan button activates the feature associated with the assigned
digits from the Flexible Numbering Plan.
 A Speed Dial bin button accesses and dials the number from the assigned Speed
Dial bin.
 A Pool button accesses an outside Line from the Line group designated for outgoing
calls. A Pool button is used primarily to provide an outgoing call appearance when a
direct Line appearance is not available. It may be used as the last choice for an
incoming outside call. The Pool button LED provides the status for the duration of
the call only.
 A Loop button provides an appearance for an outside call when a direct Line
appearance button is not available. The Loop button LED provides the status for the
duration of the call only.
 A Station User Program Code button, access or activate the special features
available with the Station User Program Codes, see section 5.25.
 An outside Line Appearance button provides access to the individual Line assigned
to the Flex button. The Line button LED provides the status of the outside Line.
With the exception of Line buttons, you can assign the feature or function of the button from
your iPECS IP or LDP Phone. If allowed in the database, you can also assign or reassign
Line buttons.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To assign a Flex button at the station
2. Press the desired Flex button.
3. Dial the digits from the Station or Flexible Numbering Plan.
4. Press the [HOLD/SAVE] button.
Or,
1. Press the [TRANS/PGM] button.
2. Press the desired Flex button.
3. Press the [TRANS/PGM] button.
4. Dial the digits from the Station User Program Code.