iPECS UCP
Feature Description and Operation Manual Issue 1.3
367
5. Press the [HOLD/SAVE] button.
Conditions
1. The {LOOP} and {POOL} buttons provide a status indication for the call as long as
the station has supervisory control.
2. If there is no available {LINE},{LOOP} or {POOL} button for a call, the station will
not ring for an incoming outside call; transfers to the station immediately recall the
initiator and recalls are routed directly to the Attendant.
3. A station may have multiple {LOOP} and {POOL} buttons.
4. When all outside Lines in a group are busy, any {POOL} buttons associate with
the group will show busy, otherwise, {POOL} buttons will only display the status of
an activate call.
5. {POOL} buttons will access a Line from the designated group using the Round
Robin or Last Used method as assigned in the database.
6. The priority for the appearance of an outside call transfer is first a direct Line
appearance ({LINE} button), if not available a {LOOP} appearance is employed, if
not available a {POOL} appearance is used. If there is no appearance available,
the transferring station recalls immediately.
7. Station User Program Codes are defined in section 5.25.
Programming
SYSTEM ID &
To Next Page
Loading...
