iPECS UCP - Send a Message; Voice Mail Class of Service

iPECS UCP
Feature Description and Operation Manual Issue 1.3
155
2.46.3.16 Send a Message
Description
You can record and send messages to other Mailboxes or a distribution list from your Voice
Mailbox.
Operation
1. At the main Voice Mail prompt, dial “4”, and follow the voice instructions to record
and send you message.
To send a message to another Mailbox
Conditions
Programming
Related Features
 Integrated Auto Attendant/Voice Mail
 Distribution Lists
 Mark a Message as Private
 Mark a message for Delivery Confirmation
Hardware
2.46.3.17 Voice Mail Class of Service
Description
The system employs a Voice Mailbox Class of Service to provide control and management of
Mailboxes. There are five VM Classes of service used to define the COS characteristics listed
below.
 Greeting length: 00-99 seconds
 Message length: 000- 600 seconds
 Number of messages: 00-250
 Retention time: 00-99 days
 E-mail notification
 Future delivery messages
 Confirm message receipt
 Private message mark
Operation
Operation of a Voice Mailbox COS is automatic once configured.