iPECS UCP - Station Flexible Button Default Table

iPECS UCP
Feature Description and Operation Manual Issue 1.3
217
2.76 Station Flexible Button Default Table
Description
When a station is registered, administrator can assign preset flexible button table to the
station automatically by default.
Operation
1. Prepare default flexible button table for station in PGM “Flexible Button Defaults”.
2. Configure conditions for each priority. You can choose 3 conditions. These conditions
will be checked AND operation if the conditions are set.
A. Station model type
B. Number of flexible button(range)
C. Station number(range)
3. Register Stations.
Conditions
1. If a station is not matched with conditions, the flexible buttons will be assigned by
default according to number of buttons.
Programming
TABLE DATA
Web Admin.
Flexible button Default Table (239)
Preset Flexible Button Default (240)
STATION DATA
Flexible Button (115/129)
Related Features
Hardware