EasyManua.ls Logo

iPECS UCP - DND Override

iPECS UCP
435 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS UCP
Feature Description and Operation Manual Issue 1.3
398
6.13 DND Override
Description
A station in the DND generally cannot receive an incoming call. The Attendant or the
Secretary station of an Executive/Secretary pair however may override the DND status to
signal the station of an awaiting call. A Flex button assigned for Intrusion is required.
Operation
Attendant
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “86 + [HOLD/SAVE]
To assign a Flex button as an{ATD INTRUSION} button
1. Press the {ATD INTRUSION} button, the call signals at the station DND.
To activate DND Override while receiving DND tone
Conditions
1. An Attendant may use Override to transfer an outside call to a station in DND.
Programming
SYSTEM DATA
Attendant Assignment
Related Features
Intrusion
DND (Do Not Disturb)
Executive/Secretary Forward
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is
recommended

Table of Contents

Other manuals for iPECS UCP

Related product manuals