iPECS UCP - Page 252

iPECS UCP
Feature Description and Operation Manual Issue 1.3
240
ST CL VS VM FS MS
001 001 005 006 001 004
2. Dial “1” to select ST (Station Message Wait).
“1” = ST: Station Message Wait
“2” = CL: CLI Message Wait
“3” = VS: Integrated VM Message Wait
“4” = VM: external Voice Mail
“5” = FS: Feature server
“6” = MS: SMS message wait.
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
MSG : 700100
700118
1. Press the [HOLD/SAVE] button.
To return a call for the current Station Message
1. Press the “*” button, the list is updated removing the message from the list.
To delete the first Message Wait from the list
1. Press the[SPEED] button.
To delete all waiting Messages
2. Press the “*” button twice.
SLT
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving ring back tone or no response on a call
announce
2. Dial “556”, the Message Wait/Call Back code.
3. Hang up, Message Wait is activated.
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving DND tone
2. Dial “556”, the Message Wait/Call Back code.
3. Hang up, Message Wait activated.
1. Dial “557”, the Message Wait/Call Back response code.
To retrieve a Station Message Wait;
Conditions
1. The system employs a line from the Network CO Group to return a Station
Message Wait call back.
2. Only LIP and LDP Phones with an LCD can receive a Station Message Wait from
a networked station.