iPECS UCP - Page 302

iPECS UCP
Feature Description and Operation Manual Issue 1.3
290
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving DND tone
2. Hang-up, Message Wait activated.
1. Press the [MESSAGE/CALL BACK] button, the user receives confirmation tone.
To leave a Call Back (queue for a station), while receiving busy
2. Hang up, return to idle.
1. Lift the handset or press the [SPEAKER] button.
To respond to a Call Back recall, when the busy station is available the system calls back,
2. Previously busy station is called.
1. Press [MESSAGE/CALL BACK] button, the message contents summary as
below or the Station Messages Waiting list will display.
To retrieve Station Messages Waiting
ST CL VS VM FS MS
001 001 005 006 001 004
2. Dial “1” to select ST (Station Message Wait)
“1” = ST: Station Message Wait
“2” = CL: CLI Message Wait
“3” = VS: Integrated VM Message Wait
“4” = VM: external Voice Mail
“5” = FS: Feature server
“6” = MS: SMS message wait
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
MSG : 100
1. Press the [HOLD/SAVE] button.
To return a call for the current Station Message
1. Press the “*” button, the list is updated removing the message from the list.
To delete the first Message Wait from the list
1. Press the[SPEED] button.
To delete all waiting Messages
2. Press the “*” button twice.
SLT
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving ring back tone or no response on a call
announce
2. Dial “556”, the Message Wait/Call Back code.
3. Hang up, Message Wait is activated.
1. Momentarily press the hook switch.
To leave a Message Wait, while receiving DND tone