iPECS UCP - Page 214

iPECS UCP
Feature Description and Operation Manual Issue 1.3
202
Operation
iPECS IP & LDP Phones
[TRANS/PGM]+ {FLEX}+ [SPEED]+ Station Speed Dial bin number + [HOLD/SAVE]
To assign a Flex button as a {STATION SPEED DIAL} button
1. Lift handset or press the [SPEAKER] button.
To dial using a Station Speed Dial with a [SPEED] button
2. Press the [SPEED] button.
3. Dial the desired bin number (“00”-“99”).
1. Press the [TRANS/PGM] button.
To program a Station Speed Dial number using the [SPEED] button
2. Press the [SPEED] button.
3. Dial the Speed Dial bin number (“00”-“99”).
4. Select a Line button or dial a Line access code.
5. Dial the number to be stored.
6. Press the [HOLD/SAVE] button.
7. If desired, enter a name, see alphanumeric entry chart below.
8. Press the [HOLD/SAVE] button.
iPECS IP Phones with 3-Soft buttons
1. Press the [DIR] soft button.
To dial using a Station Speed Dial using an LIP 8000/8000E/9000 series phones with soft
buttons
2. Press the [SPEED] soft button.
3. Dial the desired bin number (“00”-“99”).
1. Press the [DIR] soft button.
To program a Station Speed Dial number using an LIP-8000/8000E/9000 series phones
with soft buttons
2. Press the [SPEED] soft button.
3. Press the [ADD] soft button.
4. Dial the Speed Dial bin number (“00”-“99”).
5. Press Line button or dial the Line access code.
6. Dial the number to be stored.
7. Press the [HOLD/SAVE] button.
8. If desired, enter a name, see alphanumeric entry chart below.
9. Press the [HOLD/SAVE] button.
SLT
1. Lift handset.
To dial using a Station Speed Dial
2. Dial “558”, the SLT Speed Dial access code.
3. Dial the desired bin number (“00”-“99”).
1. Dial “561”, the SLT Programming code.
To program a Station Speed Dial number