iPECS UCP - Page 348

iPECS UCP
Feature Description and Operation Manual Issue 1.3
336
06 – SLT MOH 3
07 – SLT MOH 4
08 – SLT MOH 5
09 – System Announcement MOH 2
10 – System Announcement MOH 3
4. Press [HOLD/SAVE] to save your selection.
Conditions
1. The speaker volume is adjustable at the station by using the [VOL UP]/[VOL
DOWN]buttons.
2. BGM is delayed 1 second after a return to idle state.
3. Silence is provided if no BGM source is assigned.
4. For remote devices, BGM must be locally provided; BGM is not sent from the
iPECS UCP system to remote devices.
5. VSF MOH1 employs System announcement 201 and must be recorded properly.
System announcement MOH2 and MOH3 may use any unused System
announcement except for announcement 201 and 202. The announcement
number must be defined in Music Sources under System Data.
6. For SLT MOH, the SLT port must be connected properly and the station number of
the SLT port used for MOH must be assigned as the SLT MOH port.
Programming
SYSTEM DATA Music Sources BGM Type, MOH Type, Internal/External
Music, Internal Music Type, SLT MOH 1-5,VSF MOH2-3
Related Features
 MOH (Music-On-Hold)
 Internal/External & All Call Page
Hardware
 An external music source properly connected to the iPECS UCP
module, refer to the iPECS UCP Hardware Description and Installation
Manual.