iPECS UCP
Feature Description and Operation Manual Issue 1.3
374
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
To activate a Station User Program Code feature or function
2. If desired, use the [VOL UP]/[VOL DOWN] to display the desired menu item, or
dial the desired Station User Program Code with additional inputs as required.
Or,
1. Press the assigned Flex button.
Programming
Conditions
Related Features
Station Flexible Buttons
Temporary Station COS (Class of Service)/Lock
Walking COS (Class of Service)
Two-Way Record
Station Message Wait/Call Back
CLI Message Wait
Wake-Up Alarm
Pre-defined & Custom Text Display Messages
Headset Compatibility
Attendant Station Program Codes
Mobile Extension
Hardware
iPECS IP or LDP Phone w/Display
To Next Page
Loading...
