iPECS UCP - 6.6 Attendant Station User Program Codes

iPECS UCP
Feature Description and Operation Manual Issue 1.3
373
 Under selection [7] SUPPLEMENTARY, select 1~9 or “*” as below
[1] LCD DISPLAY LANGUAGE
[2] MFIM VERSION
[3] BGM
[4] REGISTER STA NAME
[5] DISP PHONE IP ADDR
[6] CHANGE PHONE IP ADDR
[7] DISPLAY MAC ADDR
[8] NETWORK CONFIG
[9] DISP PHONE VERSION
[*] DISP ADD-ON PACKAGE
 Under selection [*] SYSTEM, access Admin
[#] ENTER ADMIN
[6] SET FORCED FWD DEST
[7] FORCED FWD TO DEST
[8] REGISTER BLUETOOTH
[9] BLUETOOTH USAGE
[0] HOTDESK LOGIN
[*] HOTDESK LOGOUT
[#] ENTER ADMIN
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
To assign a Station User Program Code to a Flex button
2. Press the desired Flex button.
3. Press the [TRANS/PGM] button.
4. Dial the desired Station User Program Code and additional inputs that may be
required.
5. Press the [HOLD/SAVE] button.