iPECS UCP
Feature Description and Operation Manual Issue 1.3
227
between a standard ISDN modem and the iPECS BRI/PRI board. The connection can be set-
up over a normal or DID BRI/PRI line. The system negotiates access using two User Ids and
matching passwords assigned in the database. In addition, for DID access the Called Party
number must match the assigned system PPP destination. Once a connection is established
over the BRI/PRI, the user’s Web browser can be opened and pointed to the system’s IP
address and assigned port for access to the database.
When accessed, the system will deliver the iPECS Admin and Maintenance Web page. From
this page, selecting Admin & Maintenance will return the login page where the user must
enter an Id and password that matches an assigned Id and password. Based on the Id and
password entered, the user is permitted access to specified system Web pages.
For detailed information on database administration and maintenance, refer to the iPECS
Administration & Programming Manual.
Operation
Conditions
1. For Web Admin, the password can be encrypted using the Ericsson-LG Enterprise
Java Virtual Encryption plug-in. A Java Virtual Machine (MS or Sun) must be
installed in the user’s PC to support password encryption.
2. If Web admin login fails five consecutive(5) times within 1-minute, then login is
blocked for a ten (10) minute period and a “blocked access” log is stored in the
Admin Log.
Programming
SYSTEM ID
&NUMBERING
To Next Page
Loading...
