iPECS UCP
Feature Description and Operation Manual Issue 1.3
124
Operation
iPECS IP & LDP Phones
1. Press the [HOLD/SAVE] button twice.
To place a call on Exclusive Hold
1. Lift the handset or press the [SPEAKER] button.
To access a call on Exclusive Hold from the holding station
2. Press the held line button.
Or,
Dial “8#”, the Held Call Access code.
3. Dial the line number.
SLT
1. Momentarily press the hook-switch.
To place a call on Exclusive Hold
1. Lift the handset.
To access a call on Exclusive Hold from the holding SLT
2. Dial “8#”, the Held Call Access code.
3. Dial the line number.
Conditions
1. When an outside Line is placed on Exclusive Hold, the button LED will flash at 120
ipm at the holding station and will be ON at all other stations.
2. All transferred outside calls are placed on Exclusive Hold for the receiving station.
3. The LED of {LOOP} and {POOL} buttons will display the active outside line status.
Programming
SYSTEM DATA System Attributes Hold Preference
System Attributes Attendant Recall Timer, Exclusive Hold
Recall Timer, I-Hold Recall Timer, System Hold Recall
To Next Page
Loading...
