iPECS UCP
Feature Description and Operation Manual Issue 1.3
135
1. Dial “563” the Company Directory Name record code.
To delete Company Directory Name
2. Dial “2” to delete the Name recording.
SLT
1. Dial “563” the Company Directory Name record code.
To record a Company Directory Name
2. Dial “1”, to record your Name.
3. After the recording prompt, state your Name.
1. Dial “563”, the Company Directory Name record code.
To delete Company Directory Name
2. Dial “2” to delete the Name recording.
1. In response to the system announcement, the caller dials the Company Directory
digit.
To use Company Directory Feature
2. The system plays the First/Last name selection prompt.
3. The caller selects first or last name entry.
4. The system plays the enter 3-character prompt.
5. The caller dials the first three characters of the desired station user.
6. The System plays Name Greeting for each match (maximum 9).
7. If there is a single match, the caller is transferred. If multiple matches exist, the
system plays prompts for each with a selection digit.
“for [subscriber name], press 1”
“for [subscriber name], press 2”
…
“for [subscriber name], press 9”
8. When the caller enters the desired digit, the system routes the caller to that station.
Conditions
1. To be searched in Company Directory, the Station user name must be recorded
and the first and last name must be programmed properly.
Programming
STATION DATA VM Attributes VSF Access, Company Directory - First
To Next Page
Loading...
