iPECS UCP
Feature Description and Operation Manual Issue 1.3
148
Waiting indication at your station.
Operation
Remote Caller
1. State you message.
To leave a voice message after Greeting and beep
2. Hang up to quit recording or dial “*” for further options.
Conditions
1. Two timers are provided to control Voice Message duration. The Valid User
Message Timer establishes the minimum Voice Message duration. Voice
Messages shorter than this timer are not stored. The VSF User Maximum Record
Timer establishes the maximum Voice Message duration. When this timer expires
while recording a Voice Message, confirmation tone is heard and the message is
saved for destination station.
2. If all the AA/VM channels are in use, Ring Back tone is provided until a channel is
available.
3. All stations including a SLT can leave and receive voice messages.
4. Individual User Greetings and Voice Mails are protected from loss of AC power.
5. When an iPECS UVM gateway is employed, each System announcement should
be recorded in both the built-in VSF gateway and the UVM gateway. In addition,
each Station and Line Voice Mailbox should be associated with one of the
gateways.
Programming
STATION DATA VM Attributes VSF Back-up Station, VSF Access
Preset Call Forward Transfer to Mail Box
SYSTEM DATA System Timers Call Forward No Answer Timer,
VSF User Maximum Record Timer, VSF Valid User
Related Features
Call Forward
Station Message Wait/Call Back
Integrated AA/VM Overview
Call Transfer, Voice Mail
Hardware
To Next Page
Loading...
