iPECS UCP - Page 165

iPECS UCP
Feature Description and Operation Manual Issue 1.3
153
1. Press [PGM] button and dial 56.
To change whole mailbox greeting with station program
2. Select case type 0 (1: Unconditional, 2: Busy, 3 : No answer, 4: DND, 0:All).
3. Select greeting number 1-4.
4. Press [SAVE] button.
1. Press [PGM] button and dial 56.
To change mailbox greeting type with station program
2. Select case type 1-4, 0 (1: Unconditional, 2: Busy, 3 : No answer, 4: DND, 0:All).
3. Select 0 (1: Internal, 2: External, 0: All).
4. Select greeting number 1-4.
5. Press [SAVE] button.
1. Press [PGM] button and dial 56.
To change mailbox greeting type, call type with station program
2. Select case type 1-4, 0 (1: Unconditional, 2: Busy, 3 : No answer, 4: DND, 0:All).
3. Select 0 – 2 (1: Internal, 2: External, 0: All).
4. Select greeting number 1-4.
5. Press [SAVE] button.
1. When a user enter the mailbox, the following menu can be provided.
To record user greeting
Main Menu
to play new messages, press one
to play saved messages, press two
to play urgent messages, press three
to send a message, press four
for personal options, press five
to access administrative options, press six
to set station forwarding, press seven
to set greeting or password, press eight
to disconnect, press pound
Press 0 for the operator
Press nine to hear this message again.
2. After pressing 8, the options that can be performed from the mailbox are:
to edit your greeting, press one
to edit you password, press two
to return to main menu, press nine
3. Press 1 to edit your greeting.
to listen to your current greeting, press five
to record a new greeting, press seven
to return to the main menu, press nine
4. Press 7 to edit your greeting.
Enter greeting