iPECS UCP - Page 17

iPECS UCP
Feature Description and Operation Manual Issue 1.3
5
1. Momentarily press the Hook-switch.
To enter an Account Code during a call
2. Dial the Flex Numbering Plan code “550”.
3. Dial the Account Code (up to 12 digits).
4. Press “*”.
Conditions
1. When entering an Account Code during a call, DTMF digits are transmitted to the
connected party.
2. A maximum of 1000 {ONE-TOUCH ACCOUNT CODE} buttons may be assigned
in the system.
3. If an Authorization Code is entered as the Account Code, the SMDR record will
show the station number or the index number for a System Authorization Code
rather than the user entered Authorization Code.
4. If the Forced SMDR Account Code attribute of the station is enabled, you must
enter an Account Code prior to placing an outgoing call.
Programming
SYSTEM ID
&NUMBERING PLANS
Flexible Numbering Plan SMDR Account Code Enter
STATION DATA
Common Attributes

Forced SMDR Account Code
Related Features
 Authorization Codes (Password)
 SMDR (Station Message Detail Recording)
 Station Flexible Buttons
Hardware