iPECS UCP - Page 201

iPECS UCP
Feature Description and Operation Manual Issue 1.3
189
Message 05
OUT OF OFFICE
RETURN UNKNOWN
Message 06
CALL (enter up to 17 digits)
Message 07
IN OFFICE STA xxxx
Message 08
IN MEETING
RETURN AT TIME hh:mm
Message 09
AT HOME
Message 10
AT BRANCH OFFICE
Operation
iPECS IP & LDP Phones
{DISPLAY MESSAGE} button:
To assign a Flex button for Display Messages
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “51” + [HOLD/SAVE]
{ONE-TOUCH DISPLAY MESSAGE} button:
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “51” +message number + [HOLD/SAVE]
1. Press the [TRANS/PGM] button.
To activate Display Message
2. Dial “51”, the Display Message code.
3. To view available messages, press the[VOL UP]/[VOL DOWN] button.
4. Dial the Message number (“00”-“20”).
5. Dial auxiliary input, as desired.
6. Press the [HOLD/SAVE] button.
Or,
1. Press the {DISPLAY MESSAGE} button.
2. To view available messages, press the[VOL UP]/[VOL DOWN] button.