iPECS UCP
Feature Description and Operation Manual Issue 1.3
221
The output for the Lost Call summary count report is shown below:
Lost call count start time: 05/01/02 09:31
Current time 26/04/02 16:32
Total Lost call count until now: 121
Operation
System Attendant
1. Press the [TRANS/PGM] button.
To print the summary Lost Call Count report
2. Dial “0115”, the Lost Call Count report code.
3. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To reset the Lost Call summary Count
2. Dial “0116”, the Lost Call Count Reset code.
3. Press the [HOLD/SAVE] button.
Conditions
1. When the Lost Call Count is reset, the SMDR port will provide a “count reset”
message.
2. Individual Lost Call records are only available in real-time and not on-demand.
3. “Print Incoming Calls” and “Print Lost Calls” must be enabled in the SMDR
Attributes for the system to output real-time Lost Call records and for the Lost Call
Count summary report.
4. The fields of a Lost Call Record are the same as a normal SMDR Call Record.
Programming
To Next Page
Loading...
