iPECS UCP - Page 236

iPECS UCP
Feature Description and Operation Manual Issue 1.3
224
record will show “STA-P” and the station number, or “SYS-P” and the Authorization
code index number in place of the Account code.
7. For incoming calls, the “NUM I” and “NUM II” fields will display the assigned data
item– Ring Service time, CLI, or CPN. For outgoing calls, the NUM I field will
always display the number dialed.
8. In case of Networking call, Nxxxx(nxxxx) can be displayed by [Display Nxxxx for
Net Number] option.
Programming
SYSTEM DATA SMDR Attributes SMDR Ring/CLI/CPN Service-I,SMDR
Ring/CLI/CPN Service-II / Print Serial No, SMDR Disconnect
Cause / SMDR ICM Save
SMDR ICM Print
Related Features
 Call Cost Display
 Lost Call Recording
 Traffic Analysis
 Authorization Codes (Password)
Hardware
 Device to capture SMDR