iPECS UCP - Page 327

iPECS UCP
Feature Description and Operation Manual Issue 1.3
315
physical VoIP channels to support these functions. One or two VoIP channels
should be available for every four (4) Virtual SIP CO Lines at a minimum.
4. The Virtual SIP CO Line must still be configured as with a normal SIP Trunk
including the Proxy, Domain, etc.
5. The SIP Virtual CO Line must be configured with the Non-recursing RTP Diversion
Method. In addition, out-of-band DTMF should be selected unless the connected
iPECS device can detect inband signals (Auto Attendant/Voice Mail as an
example).
6. Note that since if a Virtual SIP CO Line is used a VoIP channel may be required for
the SIP Phone to use the SIP Trunk.
Programming
SYSTEM ID &
NUMBERING PLANS
Device Port Number Change Virtual Registration Device
ID, MAC Address check, Max Port, Soft Channel
STATION DATA SIP User Table Index
Station IP Attributes
CO LINE DATA Common Attributes CO/IP Group
VoIP Attributes

CO VoIP Mode
SIP DATA SIP User ID Attributes
SIP CO Attributes

RTP Diversion Method, DTMF Type
Related Features
 SIP Trunk Service
Hardware