iPECS UCP
Feature Description and Operation Manual Issue 1.3
388
[#] WHTU SUBSCRIBE
Operation
Attendant
1. Press the [TRANS/PGM] button, the Station Program Menu is displayed.
To activate an Attendant Station User Program Code feature or function
2. Dial “0” to access the Attendant Station Program codes.
3. Enter desired code or use the [VOL UP]/[VOL DWN] button to display the desired
menu item and enter the desired code.
4. Dial additional inputs, if required.
Condition
Programming
Attendant Assignment System Attendant, Main Attendant
Related Features
SMDR (Station Message Detail Recording)
Traffic Analysis
Temporary Station COS (Class of Service)/Lock
Authorization Codes (Password)
System Clock Set
Pre-defined & Custom Text Display Messages
Integrated Auto Attendant/Voice Mail
Dial-by-Name
Auto Service Mode Control
Back Ground Music
Station User Programming & Codes
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is
recommended
To Next Page
Loading...
