iPECS UCP
Feature Description and Operation Manual Issue 1.3
407
outside call, the SLT user receives error tone and may go on-hook to receive recall
and retrieve the held call.
4. During a Camp-On Broker Call, if the SLT user goes on-hook, the active call is
disconnected and the held call recalls to the SLT.
5. During a Camp-On Broker Call, if the active party disconnects from the SLT, the
SLT user receives error tone. The SLT user may momentarily press the hook-
switch to retrieve the held party or go on-hook and receive recall.
6. If the SLT user presses the hook-switch twice in less than 2 seconds, a 3-way
conference is established.
7. For a Camp-On Broker call, after a hook-switch flash, the user must begin dialing
prior to expiration of the dial tone timer or the SLT will receive error tone.
8. If the SLT goes to an on-hook state with a call on hold, the SLT will receive recall
ring automatically.
9. The SLT Flash mode must be set to Transfer.
Programming
To Next Page
Loading...
