iPECS UCP - Page 73

iPECS UCP
Feature Description and Operation Manual Issue 1.3
61
2. Dial “588”, the Pick-Up Group Call Pick-Up feature code.
Or,
3. Press the {PICK UP GROUP CALL PICK-UP} button.
SLT
1. Lift the handset.
To Pick-up a call ringing at another station in the same Call Pick-Up group
2. Dial “588”, the Pick-Up Group Call Pick-Up feature code.
Conditions
1. Pick-Up Group Call Pick-up applies to stations within the same Pick-Up Group and
does not apply to other types of Station Groups where Group Call Pick-Up may be
used.
2. To pick-up an outside call, you must have an idle appearance button available.
3. When several calls are ringing simultaneously, Call Pick-Up will connect the oldest
highest priority call (System Data Ringing Line Preference Priority).
4. Queue callback and Private Line calls are not subject to Call Pick-Up and such
attempts receive error tone.
5. Hands free announced intercom calls cannot be picked up by another station. Only
ringing intercom calls are subject to Call Pick-up.
6. When a station belongs to multiple Pick-Up Groups, calls to the group with the
lowest number are answered first.
Programming
STATION GROUP
DATA
Station Group Assignment Group Type, Pick-Up Attribute
STATION DATA
Common Attributes

Pick-Up by Flex Button
SYSTEM DATA
RLP (Ringing Line Preference) Priority
Related Features
 Intercom Signaling Mode
 Ringing Line Preference
 Directed Call Pick-Up
 Pick Up Group
 Private Line
Hardware