iPECS UCP - Page 97

iPECS UCP
Feature Description and Operation Manual Issue 1.3
85
3. Enter the desired name for searching.
4. Press [Search] soft button.
Matched name is displayed on LCD.
The name can be scrolled by using navigation key.
5. To display the number of the searched name, press [DETAIL] soft button.
6. Press [SEND] soft button to call.
1. Press the [DIR] soft button on LIP-8000/8000E/LIP-9000 that have soft&
navigation buttons.
To search name by System DB and LDAP
2. Dial ‘5’.
3. Enter the desired name for searching.
4. Press [Search] soft button.
Matched name that is in system DB is displayed on LCD.
The name can be scrolled by using navigation key.
If there is no result for searching name, the [LDAP] soft button will be displayed.
If the user presses [LDAP] soft button, the name will be searched in LDAP server.
5. To display the number of the searched name, Press [DETAIL] soft button.
6. Press [SEND] soft button to call.
Conditions
1. Available characters are A to Z, space and period.
2. The LCD will display multiple names, one per LCD line up to 20characters.
3. If you select a directory with no entries or there is no match to the entry, the “No
Entries” message is displayed and error tone is provided.
4. Dial-by-Name is only available to iPECS IP and LDP Phones with a display. Other
users will receive error tone if an attempt is made to access Dial-by-Name.
5. You may both scroll and enter characters to search a directory.
6. The search feature is functioned for only LIP80xx/80xxE/90xx phone with 3 soft
button and navigation buttons.
7. After inputting digits more than 3, the searching is enable.
8. When a name is searched in LDAP server, maximum 40 names can be searched.
9. Maximum 50 keysets in UCP can be the searched name list(from LDAP) state at
the same time.
10. Maximum 50 keysets in UCP can be the searched name list(from internal
directories) state at the same time.
11. The search is possible only from the first character of a name.
Ex) if the user searches “bcd”, the “bcdmfg” is searched. But the “kmbcda” is not
searched.
12. If no action in directory/searching menu for a 30 seconds, the phone will go to the
idle state.