Appendix F Default value list (BDE-App 01.31)
F-3
Item Default
Setting from Web Interface
Chapter Title
6.5.4.3
Permission for each service type
Limitation value for each Service Type
Time/Size
Reset Cycle for the limitation count
Updated date
Closing Day
6.5.5.1
Service Type for PS connection
Service Type
Authority of editing APN manually
APN User name and Password
APN User / Password
Global IP Address for PS connection
Use of Packet Detect Activate function
Service type for Secondary Service
Secondary Service Type
Profile used for Always Activate
6.5.5.3
Local IP Address connected by Always Activate
1~3 – Local IP
Service Type used by Always Activate
6.5.5.4
User name of Remote Activate
User
Password of Remote Activate
Password
Profile used for Remote Activate
Local IP Address used by Remote Activate
Local IP
Service Type used by Remote Activate
6.5.5.5
Port Tagging setup for User LAN (Port1~4)
6.5.5.6
Port 1~4
Minimum allocation IP address for DHCP
Total amount of allocatable IP address number
IP Address of VLAN2~4
VLAN2~4 – IP Address
Subnet Mask of VLAN2~4
VLAN2~4 – Subnet Mask
Minimum allocation IP address for DHCP
VLAN2~4 – Start IP
Total amount of allocatable IP address number
VLAN2~4 – Count
IP Address allocated by Static DHCP
6.5.5.7
Setting List – IP Address
Targeting MAC address for Static DHCP
Setting List – MAC Address
To Next Page
Loading...
