Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 100
VLAN Management > MRP
This section lets you set and view Media Redundancy Protocol setting.
VLAN Management > MRP > Ports
This page lets you set MRP generic settings for all switch ports.
Port: The port number for which the following configuration applies.
Join Timeout: Controls the timeout of the Join Timer for all MRP Applications on this switch port. This value is
restricted to 1-20 centiseconds.
Leave Timeout: Controls the timeout of the Leave Timer for all MRP Applications on this switch port. This value
is restricted to 60- 300 centiseconds.
LeaveAll Timeout: Controls the timeout of the LeaveAll Timer for all MRP Applications on this switch port. This
value is restricted to 1000- 5000 centiseconds.
Periodic Transmission: Enable or disable the Periodic Transmission feature for all MRP Applications on this
switch port.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English