Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 222
Security > IP Source Guard > Dynamic Table
Entries in the Dynamic IP Source Guard Table are shown on this page. The Dynamic IP Source Guard Table is
sorted first by port, then by VLAN ID, then by IP address, and then by MAC address.
Each page shows up to 99 entries from the Dynamic IP Source Guard table (the default is 20) selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning
of the Dynamic IP Source Guard Table.
The "Start from port address", "VLAN" and "IP address" input fields let you select the starting point in the Dynamic
IP Source Guard Table.
Port: Switch Port Number for which the entries are displayed.
VLAN ID: The VLAN-ID in which IP traffic is permitted.
IP Address: User IP address of the entry.
MAC Address: The Source MAC address.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Refreshes the displayed table starting from the input fields.
First Page: Updates the table starting from the first entry in the Dynamic IP Source Guard Table.
Next Page: Updates the table, starting with the entry after the last entry currently displayed.
To Next Page
Loading...
Need help?
General
