Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 196
DHCP > DHCPv6 Relay > Configuration
This page lets you configure DHCPv6 Relay for a specified VLAN.
Interface: Displays the interface identification.
Relay Interface: The identification of the interface used for relaying.
Relay Destination: Enter an Ipv6 address represented as human readable test as specified in IETF RFC 5952.
This is the IPv6 address of the DHCPv6 server that requests will be relayed to. The default value 'ff05::1:3' means
'any DHCP server'.
Buttons
Add New Entry: Click to add a new entry to the table.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
