Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 268
SNMP
SNMP (Simple Network Management Protocol) is part of the Transmission Control Protocol/Internet Protocol
(TCP/IP) protocol for network management. SNMP allow diverse network objects to participate in a network
management architecture. It enables network management systems to learn network problems by receiving traps
or change notices from network devices implementing SNMP.
SNMP > SNMPv1/v2c
Configure SNMPv1 and SNMPv2 on this page.
Mode: Indicates the SNMP mode operation. Possible modes are:
on: Enable SNMP mode operation.
off: Disable SNMP mode operation.
v1/v2c Read Community: The id that allows access to the device's data.
v1/v2c Write Community: The id that allows change to the device's data.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
