Lantronix SISPM1040 L3 Series - Security > ARP Inspection > Static Table

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 229
Security > ARP Inspection > Static Table
This page shows the static ARP Inspection rules. The maximum number of rules is 256 per switch.
Delete: Check to delete the entry. It will be deleted during the next save.
Port: At the dropdown select the required logical port for the settings.
VLAN ID: Enter the VLAN ID for the settings.
MAC Address: Enter the allowed Source MAC address in ARP request packets.
IP Address: Enter the allowed Source IP address in ARP request packets.
Buttons
Add New Entry: Click to add a new entry to the Static ARP Inspection table.
Delete : Check to delete the entry. It will be deleted during the next save.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.