Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 314
Rapid Ring
This page lets you view and set current Rapid Ring parameters. Note that other Ring technologies (e.g., STP,
MRP) must be disabled. Rapid Ring is a redundancy proprietary protocol on your network; it can be used to
recover the network system from critical links failure to protect from network loops. Rapid Ring recovery time can
be less than 20ms on up to 250 switches (much lower recovery time than other redundancy protocols).
Global Configuration
Index: Displays the Rapid Ring Instance number (1-4).
Role: Set the Rapid Ring role value (Disabled, Master, or Member).
Port: The switch port number of the port (e.g., 25-32 or 17-22).
Status: The current Rapid Ring status of the port (e.g., Forwarding, Discarding).
Buttons
Apply: Click to apply changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Messages:
Rapid Ring Configuration Error Error in port 25, STP is enable

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English