Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 392
OSPFv3 > Configuration > Interfaces
This page displays the OSPF6 interface configuration table.
Interface: Interface identification.
Priority: User specified router priority for the interface. The allowed range is 0- 255 and the default value is 1.
Passive Interface: Indicates whether the interface is passive or not
Cost: User specified cost for this interface. It's link state metric for the interface. The field is significant only when
'IsSpecificCost' is TRUE. The allowed range is 1- 65535 and the default setting is 'Auto’ cost mode.
Hello Interval: How many Hello packets will be sent per second. The allowed range is 1- 65535 seconds and the
default value is 10 seconds.
Dead Interval: The time interval (in seconds) between hello packets. The allowed range is 1-65535 seconds and
the default value is 40 seconds.
Retransmit Interval: The time interval (in seconds) between link-state advertisement (LSA) retransmissions for
adjacencies. The allowed range is 3- 65535 seconds and the default value is 5 seconds.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
