EasyManuals Logo

Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040 L3 Series
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #234 background imageLoading...
Page #234 background image
Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 234
Security > Port Security > MAC Address
Port Security Static and Sticky MAC Addresses
This page lets you add and delete static and sticky MAC addresses managed by Port Security.
Port Security defines three types of MAC addresses, to which static and sticky can be added and removed on this
page:
Dynamic: A MAC address learned through learn frames coming to the Port Security module while the
interface in question is not in Sticky mode. Dynamic entries disappear if they age out or if the interface
link goes down.
Static: A MAC address added by end-user through management. Static MAC addresses are not subject
to aging and will be added to the MAC address table once Port Security gets enabled on the interface.
Static entries are part of the running-config and will survive interface link state changes and reboots if
saved to startup-config. Static entries can be added to the running-config at any time whether Port
Security is enabled.
Sticky: When the interface is in sticky mode, all entries that would otherwise have been learned as
dynamic are learned as sticky. Like static entries, sticky entries are part of the running-config and will
survive interface link state changes and reboots if saved to the startup-config. Though not the intention
with Sticky entries, they can be added by management to the running-config at any time whether Port
Security is enabled on the interface, as long as the interface is in Sticky mode. Sticky entries will
disappear if the interface is taken out of Sticky mode. The table contains one row per static or sticky MAC
address.
Delete: Press this button to remove the entry from the MAC address table (if present) and the running-config.
Note that dynamic entries may be removed all-together on an interface from "Monitor > Security > Port Security >
Switch" and one-by-one from "Monitor > Security > Port Security > Port".
Port: Displays the port number to which this MAC address is bound.
VLAN ID: The VLAN ID in question.
MAC Address: The MAC address in question.
Type: Displays the type of entry; it may be either Static or Sticky (see description above).

Table of Contents

Other manuals for Lantronix SISPM1040 L3 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix SISPM1040 L3 Series and is the answer not in the manual?

Lantronix SISPM1040 L3 Series Specifications

General IconGeneral
BrandLantronix
ModelSISPM1040 L3 Series
CategorySwitch
LanguageEnglish

Related product manuals