Lantronix SISPM1040 L3 Series - Event Notification > Digital I;O

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 343
Event Notification > Digital I/O
This page lets you configure the normal modes of digital input/output (DI/DO).
DI Normal Mode: Set the normal mode of the digital input(DI). You can set it to High or Low.
DO Normal Mode: Set the normal mode of the digital output(DO). You can set it to Open or Close.
Buttons
Apply: Click to save the changes.