Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 274
SNMP > SNMPv3 > Access
Configure up to 12 SNMPv3 accesses on this page. The entry index keys are Group Name, Security Model and
Security Level.
Delete: Check to delete the entry. It will be deleted during the next save.
Group Name: A string identifying the group name that this entry should belong to. The allowed string length is
1 – 32 characters, and the allowed content is ASCII characters 33 - 126.
Security Model: Indicates the security model that this entry should belong to. Possible security models are:
any: Any security model accepted(v1, v2c, or usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: SNMPv3, User-based Security Model (USM).
Security Level: Indicates the security model that this entry should belong to. Possible security models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
Read View Name: The name of the MIB view defining the MIB objects for which this request may request the
current values. The allowed string length is 1-32 characters, and the allowed content is ASCII characters
33 - 126.
Write View Name: The name of the MIB view defining the MIB objects for which this request may potentially set
new values. The allowed string length is 1-32 characters, and the allowed content is ASCII characters 33 26.
Buttons
Add New Entry: Click to add a new access entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
