Lantronix SISPM1040 L3 Series - Event Notification > Event Configuration

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 344
Event Notification > Event Configuration
This page lets you set and view current trap event severity parameters.
Group Name: The name identifying the severity group.
Severity Level: Every group has a severity level. These level types are supported:
<0> Emergency: System is unusable.
<1> Alert: Action must be taken immediately.
<2> Critical: Critical conditions.
<3> Error: Error conditions.
<4> Warning: Warning conditions.
<5> Notice: Normal but significant conditions.
<6> Information: Information messages.
<7> Debug: Debug-level messages.
Syslog: Check the box to enable this Group Name in Syslog.
Trap: Check the box to enable this Group Name in Trap.
SMTP: Check the box to enable this Group Name in SMTP.