Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 399
OSPFv3 > Database > General Database
This page displays the OSPF6 LSA link state database information table.
Set the Start from Area ID, Link State Type, Link State ID, Advertising Router, and entries per page controls.
Controls:
Start from Area ID: Enter the Area ID in the format 0.0.0.0.
Link State Type: At the dropdown select Router, Network, Summary, ASBR Summary, External, or NSSA
External.
Link State ID: Enter the Link State ID in the format 0.0.0.0.
Advertising Router: Enter the Advertising Router IP in the format 0.0.0.0.
Parameters:
Area ID: The OSPF6 area ID of the link state advertisement. It is not required for external LSA.
Link State Type: The type of the link state advertisement (e.g., Router, Link, or InterAreaPrefix).
Link State ID: The OSPF6 link state ID. It identifies the piece of the routing domain that is being described by the
LSA.
Advertising Router: The advertising router ID which originated the LSA.
Age (in seconds): The time in seconds since the LSA was originated.
Sequence: The LS sequence number of the LSA.
Buttons
Auto-refresh : Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
|<< : Updates the table entries, starting from the first available entry. If the first entry of the table is displayed, the
button is disabled.
<< : Updates the table entries, ending at the entry prior to the first entry currently displayed. If the first entry of the
table is displayed, the button is disabled.