Lantronix SISPM1040 L3 Series - OSPF > Status > Neighbor Status

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 369
OSPF > Status > Neighbor Status
This page displays the OSPF IPv4 neighbor status table which provides OSPF neighbor status information.
Neighbor ID: The Neighbor ID.
Priority: The priority of OSPF neighbor. It indicates the priority of the neighbor router. This item is used when
selecting the DR for the network. The router with the highest priority becomes the DR.
State: The state of OSPF neighbor. It indicates the functional state of the neighbor router.
Dead Time: Indicates the amount of time remaining that the router waits to receive an OSPF hello packet from
the neighbor before declaring the neighbor down.
Interface Address: The IP address.
Interface: The network interface.
Buttons
Auto-refresh : Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.