Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 204
Security > Management > Auth Method
This page lets you configure authentication, authorization, and accounting methods used when logging into the
switch via one of the management client interfaces. The table has one row for each client type and several
columns.
Authentication Method
Client: The management client for which the configuration below applies.
Methods: Method can be set to one of the following values:
no: Authentication is disabled, and login is not possible.
redirect: When HTTP is enabled, enable HTTPS automatic redirect on the switch.
local: Use the local user database on the switch for authentication.
radius: Use remote RADIUS server(s) for authentication.
tacacs: Use remote TACACS+ server(s) for authentication.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English