Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 127
DSCP-based QoS
This page lets you configure basic QoS DSCP-based QoS Ingress Classification settings for the switch.
DSCP: The maximum number of supported DSCP values is 64.
Trust: Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a
specific CoS and DPL. Frames with untrusted DSCP values are treated as a non-IP frame.
Queue Priority: Queue Priority value can be 0-7 where 7 is the highest priority.
DPL: Drop Precedence Level (0-3)
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
